About a year ago, I had the iQunix EZ63 on my desk. I called it a crippled demon back then — fast, fun, almost flawless, just held back by a couple of small things, but already made Wooting 60HE look crippled. Now I’ve got its younger brother, the EV63. Same small footprint, but way more refined. It looks slick, feels sexy, and despite being tiny, it hits like a full-sized board.
This unit was sent out to for review, but iQunix had no influence over the review.
Read my iQunix EZ63 Review first
In the Box
- iQunix EV63 Magnetic Keyboard
- brush
- USB-A to C cable
- keycap/switch puller
- quick start guide
- iQunix sticker
- warranty card
Bottom line? I miss some goodies like additional switches and the carrying case, but the quality of the keycap/switch puller and the brush is fine.
Unboxing and RGB Showdown
Specs and Highlights
Design and Build Quality
The iQunix EV63 stands out with its futuristic design, resembling the internals of an alien spaceship with sides designed like mechanical arms. It features a tray mount system for magnetic keyboards (unlike the EZ63, which was a gasket mount design), enhancing stability and accuracy. The high-quality aluminum case and plate, combined with hollowed-out side panels, allow users to peer into the keyboard’s mechanics, adding a unique visual appeal. Two layers of Poron foam inside further refine the stability and precision, making each keystroke a precise strike.
The sides of the keyboard are now nicely polished and rounded for improved comfort and safety (unlike EZ63, which had sharper edges). The construction is incredibly sturdy, with an option to adjust stability by removing eight screws on the sides, though this step proved unnecessary as the keyboard was already perfectly stable right out of the box. It sits comfortably on any desk, offering a blend of aesthetics and functionality.
One notable downside is the fixed typing angle of 6 degrees, which can make long typing or aggressive gaming sessions slightly stressful and potentially painful for the wrists. This lack of adjustability means that users might experience discomfort without the option for ergonomic adjustments like removable, magnetic silicon pads, as seen in the Melgeek O2, for example, or kick-out feet. Adding a wrist rest could mitigate this issue, but unfortunately, iQunix does not offer one for this model yet.
Also, the EV63 is compatible with standard 60% layout cases, like Tofu60 (not tofu2.0), Holy60, and GH60 cases. It is the first keyboard to feature 3rd-generation Hall Effect sensors while remaining compatible with the standard 60% keyboard PCB layout.
In summary, the iQunix EZ63 isn’t just for typing; it’s a piece of art that combines high-tech design with practical features. The overall build quality and innovative design make it a compelling choice for enthusiasts seeking something extraordinary in their keyboard collection. It’s just very solid, feels like a rock, and it looks gorgeous as well.
Bottom line? Absolute premium materials and build, fixed typing angle though.
Keycaps
I got the EV63 with smoked/frosted PC caps (cherry profile), and they’re freaking solid. Texture feels dry and grippy so they don’t get oily, and the legends aren’t going anywhere — unlike the usual UV/heat-transfer crap. Honestly, the second set of caps I’ve had that don’t show wear (EZ80 from iQunix has similar ones). Plus, the PC lets RGB shine through clean, so if you’re into the full lightshow look, they nail it.
Bottom line? Translucent caps are the way to go.
Switches
The Magnetic X switch is custom-built by iQunix and combines a naval-grade central stem with a reinforced magnetic core. I understood already a while ago that I want only switches with the “collar” around the stem because it greatly adds to the overall stability of the switch, and the feeling is also better. This is no different, even better than usual.
Specification:
- Initial Force: 36±10gf
- End Force: 48±10gf
- Travel Distance: 3.5±0.2mm
- Initial Magnetic Flux: 130±15Gs
- End Magnetic Flux: 735±80Gs
- Lifespan: 100 million+
- Pre-lubed
- Crispy sound
But here’s the kicker — these switches have the flux increased by 30%. When you crank up the bottom-out flux on a magnetic switch, you’re basically making the sensor read a stronger magnetic signal when the key is fully pressed down.
For the switch:
- The signal at the very bottom is stronger, so the keyboard knows for sure the key is fully pressed. Less chance of false readings or wobbly data.
- Because the reading is stronger at the bottom-out, the middle vs bottom difference is clearer. That makes the actuation curve more stable, no weird jumps if you smash the key down hard.
- It doesn’t change how the key feels under your finger (that’s spring and stem), but it does make the electrical part more precise.
For the keyboard:
- It helps the board “see” the travel more accurately, which is nice for analog or adjustable actuation settings.
- Slightly more work for the controller, but the power impact is almost nothing.
- It can even help with latency since the stronger signal lets the firmware cut down on filtering and guesswork.
- More stable in the long run, too — heat or magnet wear won’t mess with detection as much.
So, bumping up bottom-out flux doesn’t change the press feeling at all, but it does make the board more solid, precise, and trustworthy when it comes to sensing.
Also, the switches have no wiggle/wobble and are decently lubed, but that goes without saying these days. Their sound is crisp. grainy and crunchy.
Bottom line? Great, self-developed switches that add to overall stability and precision quite a lot.
Sound Test
Latency
The EV63 feels lightning fast. Specs say 0.125 ms latency, but in real use it’s closer to 0.5 ms — and honestly, you can feel it. Every key press lands right away, no delay, no mush. It’s like the board is wired straight into your brain. Also, what really matters in magnetic boards is the release latency — here we have 0.49ms. That’s very, very good.
The 0.01 mm rapid trigger is nuts. You barely touch a key, and it reacts. Flicks, bunny hops, resets — all tight, no wasted motion. In a clutch moment, it really shows: peeks, fast taps, defuses, everything just feels sharper. I even saw it dip closer to 0.005 mm sensitivity in tests, which is insane.
This is why I broke so many of my old movement records on trick maps. The EV63 just doesn’t get in the way. It’s pure speed.
The new 480 MHz MCU, 8k polling rate, 16k scanning rate, the updated MAT 2.0 algorithm, and the increased bottom-out flux of the switch — iQunix have pushed it really hard. And it shows.
Bottom line? Very low latency, great press/release tests that show the potential of EV63.
Software
With HE boards, it’s all about the software. Hardware is what it is, but the software decides how good the experience actually feels. Luckily, iQunix did a pretty solid job here. Their web app isn’t the most stacked compared to some others, but what’s there works well. You get actuation point adjustment, Rapid Trigger, dead zone settings, SOCD, Mod Tap, Rappy Snappy, TGL, RGB customization, layers, and even one-click pro player presets. The macros and proper profile management are also there, you can’t tweak the polling rate, though (it’s locked at 8K).
About SOCD 2.0, this board has: the enhanced SOCD (toggled with FN+Q) actually changes how the board handles inputs. Compared to the basic version, it reduces input delay, enables quicker directional stops, and is tuned more precisely for competitive play. There will also be (not available now) a visual indication that the option is ON/OFF, just iQunix hasn’t figured out how to implement it yet.
The EV63 uses something called the M.A.T. Algorithm 2.0, which was designed with feedback from competitive players and streamers. Instead of relying on artificial dead zones like some other systems, it works on improving consistency and voltage stability, which makes the keyboard more reliable overall. It also comes with a new 3rd-gen linear Hall sensor that uses a single-sided design. The idea here is to get more stable signals, better accuracy, and higher usable voltage compared to older designs.
All in all, I didn’t run into any of the random cut-outs or lag that the EZ63 sometimes had (those were from dodgy USB ports on a few units). This one feels rock solid on the hardware side. Only small “huh?” moment — the default tilde is Left Shift + Esc instead of Fn + Esc. Weird at first, but honestly kinda nice once you get used to it. Also, having Fn + Q as a quick SOCD toggle is a nice touch.
Bottom line? The software has been greatly improved over the last few months; now, only small updates are required.
Comparison to EZ63
Choose EZ63 if you want:
- A richer typing experience (gasket mount, premium feel)
- High adjustability (0.05–4 mm)
- Accessories and mod-friendly design
- A more immersive acoustic and typing feel
Choose EV63 if you prefer:
- Even finer adjustability (down to 0.01 mm)
- The latest and better switch technology (Magnetic X Pro)
- A stiffer tray mount for a more solid typing feel
- Lower price with modern minimalist aesthetics
- 16 kHz PCB scanning rate and new performance enhancements
Bottom line? EZ63 means premium typing, gasket softness, and a full package. EV63 is more budget-friendly, offering cutting-edge precision (0.01 mm actuation, 16 kHz scan) and a stiffer tray mount.
Summary
The EV63 feels like iQunix finally made a Hall-Effect board for every gamer (if you are fine with the small keyboard layout), not just keyboard nerds. It’s cheaper than the EZ63, a bit lighter, and the tray mount makes it stiffer under the fingers. At first, I thought I’d miss the gasket feel from the EZ63, but the extra firmness actually helped me with control. The new Magnetic X Pro switches are crazy precise — 0.01 mm makes every tap count.
I ended up breaking most of my trick map records with it. FPS movement felt tighter, like the keyboard was reading my thoughts before I finished the motion. The 16 kHz scan rate is no joke either; it responds instantly. For everyday use, it’s still comfortable, nothing flashy, and you don’t get the premium case or coiled cable like with the EZ63, but it doesn’t matter. The EV63 is just pure performance.
Why would iQunix release something similar to the EZ series? Well, the main difference between the EZ80 (and EZ63) and the EV63 comes down to design. The styling and details are not the same, and that also means the materials, production methods, timelines, and even yield rates vary a bit — which explains the small price difference. The EZ80 is still the classic flagship (with better goodies in the box), a TKL board that works great for both gaming and everyday use. The EV63, on the other hand, is smaller, sharper-looking, and built with Forged Carbon Fibre, which makes it a really strong option as a compact entry-level gaming keyboard.
What’s important is that whether it’s the EZ63, EZ80, or EV63, the focus on performance and quality never changes. Each has its own strengths and personality — it just depends on what style and needs you prefer, rather than one being better than the other.
Bullet Points
- probably the best magnetic keyboard below the 75% layout now (end of August 2025)
- more refined and less expensive alternative to the EZ60/63, catering to a different taste
- absolute premium build quality
- industrial and futuristic design, but without the sharp edges of the EZ series
- Incredible in-game performance and very good raw performance
- The switches and 3rd generation Hall Effect sensors, alongside the 2.0 MAT algorithm, are the main reason for EV63’s precision and stability
- Latency is top tier of 0.5/0.49ms per press/release (real value, not lab tests)
- great color options to choose from
- The Magnetic X Pro is a much better switch than the Gateron Star Trail switch used in EZ60/63
- great frosted, translucent PC keycaps,
- The default key combo for the tilde (Left Shift+Esc) is different than the default Fn+Esc, something weird at first, but more intuitive in the long run. A shortcut for SOCD (Fn+Q) is great to have as well.
- refined software with SOCD, Mod Tap, Rappy Snappy, DKS, TGL
- RGB has been greatly improved over the EZ60/63
- The box contents have been stripped down compared to the EZ series
- Some minor tweaks to the software could still be introduced
- Lack of kick-out feet and non-adjustable height could lead to some wrist strains; a wrist-rest could be useful
Get your iQunix EZ63 and use code “kapitankloze” for your discount!
Disclaimer: This review is not a paid endorsement. I want to ensure transparency and let you know that I am not receiving any compensation, monetary or otherwise, for evaluating or discussing this tech product.
